10.1 Inch Touch Monitor C1016
The C1016 is a 10.1 inch touch display with a listed resolution of 1280 by 800 and 1920 by 1200, a 16:10 panel, a brightness of 350 candela per square metre and resistive or capacitive touch optional. The two resolution figures are both taken from the model's specification table, and this page presents them exactly as listed rather than choosing one and discarding the other. A buyer who needs a single resolution figure for an application should confirm which figure applies to the version being quoted.
Listed specification in context
The C1016 lists a contrast ratio of 800:1, a refresh rate of 60 hertz and a plastic housing. Its power supply is listed as DC 12 volt at 2 amperes, and its overall dimensions are 246 by 169 by 35 millimetres. The 16:10 aspect ratio sits between the squarer 4:3 panel of the 8 inch model and the widescreen 16:9 panels of the 7 inch and 11.6 inch models, which suits content with a moderate amount of vertical space, such as a control screen with a header, a main area and a footer row. A buyer should check the layout against the 16:10 ratio rather than assuming a widescreen layout will fit unchanged.
The interface list for the C1016 is HDMI, VGA and USB. It does not list AV or BNC, unlike the two smaller models, so a buyer who needs an analogue video input should not assume this model provides one. The accessories listed for this model are a power supply, a VGA cable, a USB cable, a speaker stand and a manual. The speaker stand is listed for this model and should not be assumed for other models.
Touch choice for this model
Touch choice is one of the first decisions in an industrial monitor enquiry, and it should be made from the way the screen will actually be used. A resistive touch layer responds to pressure, so it can be operated with a gloved hand or a stylus, while a capacitive touch layer responds to the touch of a finger and suits a familiar swipe-and-tap style of use. Neither type is better in every setting: the right choice depends on gloves, on whether a stylus will be used, on cleaning routines and on how the screen will be mounted. The model pages on this site state the touch type listed for each model, and where a model lists touch as optional, the enquiry should state which touch type is wanted so the correct version is quoted.
Because the C1016 lists touch as resistive or capacitive optional, the enquiry must name the wanted touch type. The choice should follow the way the screen will be used: gloved or stylus operation points to resistive, while finger taps point to capacitive. The touch version should be named in the enquiry and confirmed in the quotation, so the delivered unit matches the intended use.
Use and limits
The C1016 suits a medium control panel, a point-of-sale terminal, a machine front or a viewing station where a 10.1 inch screen fits the opening and the content. Its limits are those of a medium screen: it will not show as much at once as an 11.6 inch or 15 inch screen, and a layout designed for a larger screen should be rechecked at this size. If the application needs analogue video input, the 7 inch or 8 inch models, which list AV and BNC, should be considered instead.
Specification - as listed for this model
| Item | Listed value |
|---|---|
| Model (as listed) | C1016 |
| Screen size | 10.1 inch |
| Resolution | 1280 x 800 / 1920 x 1200 (both as listed) |
| Aspect ratio | 16:10 |
| Brightness | 350 cd/m2 |
| Contrast ratio | 800:1 |
| Touch type | Resistive / capacitive optional |
| Refresh rate | 60 Hz |
| Housing | Plastic housing |
| Power supply | DC 12V, 2A |
| Overall dimensions | 246 x 169 x 35 mm |
| Interfaces | HDMI / VGA / USB |
| Accessories (as listed) | Power supply, VGA cable, USB cable, speaker stand, manual |
Values above are taken from the listed specification for this model only. They are not a range-wide promise. Items not listed here are confirmed per model in the enquiry.
Enquiry checklist
Before sending an enquiry, note the screen size, touch type, interface list, quantity and application, and whether the monitor will be open frame, embedded or panel mounted. Minimum order quantity and lead time are unavailable on this site and are confirmed per model in the enquiry. Quotations are confirmed per order.
Send an enquiry | Telephone: 0755-89356766, 137 6020 7772
Frequently asked questions
How do I get a quotation?
Send an enquiry with the size, touch type, interface list and quantity you need, plus the application. Quotations are confirmed per order, and specifications are confirmed per model before payment. This site does not list fixed selling figures.
What certification documents can you provide?
CCC, CE, FCC and RoHS are stated by the company. Certificates are available upon request. If a buyer needs a certificate for a specific model, ask for it in the enquiry and name the model, so the correct document can be checked.
Are the specifications on this page valid for every model?
No. Specifications are shown per model and must not be read across the whole range. Where a value is not listed for a model, the page says to confirm per model rather than filling in a generic figure.