Resistive vs Capacitive Touch Screen
Resistive and capacitive are the two touch technologies listed for the monitors on this site, and buyers often ask which one to choose. This guide compares them in general terms, using the listed models as examples. It does not describe touch physics in detail, and it does not state a performance figure for either technology, because no such figures are listed for the models. The comparison is about how each type behaves in use, and which working conditions suit each one.
How the two types behave in use
A resistive touch screen responds to pressure: pressing the surface brings two layers into contact, and the screen registers the position of the press. That behaviour means it works with a gloved hand, a stylus, a pen or any firm object, which suits industrial, medical and outdoor-facing terminals where gloves are routine. A capacitive touch screen responds to the touch of a finger: it senses the electrical properties of the fingertip, which gives a familiar swipe-and-tap feel, but it may not respond reliably through a thick glove or to a non-conductive stylus. The choice therefore starts from the hand that will use the screen, not from a specification table.
Durability and cleaning also differ in practice. A resistive surface is a flexible layer that can show wear after very heavy use, while a capacitive surface is usually a hard glass front that resists scratches and is easy to wipe clean. A screen that will be cleaned often, or that sits in a public place, may suit a hard front, while a screen that will be used with gloves may need the pressure response more than the hard front. Both considerations should be weighed together, rather than choosing on one quality alone.
Which models list which type
The listed models on this site show both patterns. The 7 inch C0716 lists resistive touch. The 8 inch C1208, the 10.1 inch C1016, the 15 inch C15 and the 15.6 inch C1516 list resistive or capacitive touch optional, which means the enquiry must name the wanted type. The 11.6 inch C1116 lists resistive and capacitive touch. A buyer comparing models should therefore read the touch line on each product page, because the touch offering is not the same across the range, and a model should not be assumed to offer both types unless its page says so.
Touch choice is one of the first decisions in an industrial monitor enquiry, and it should be made from the way the screen will actually be used. A resistive touch layer responds to pressure, so it can be operated with a gloved hand or a stylus, while a capacitive touch layer responds to the touch of a finger and suits a familiar swipe-and-tap style of use. Neither type is better in every setting: the right choice depends on gloves, on whether a stylus will be used, on cleaning routines and on how the screen will be mounted. The model pages on this site state the touch type listed for each model, and where a model lists touch as optional, the enquiry should state which touch type is wanted so the correct version is quoted.
A practical decision checklist
Start with gloves: if gloves will be used, choose a pressure-responsive type and confirm it in the enquiry. Then consider the stylus: if a stylus is part of the workflow, the same choice applies. Then consider cleaning: if the screen will be wiped many times a day, ask about the front surface and its cleaning tolerance. Then consider the gesture style: if the application needs multi-touch gestures such as pinch and swipe, ask whether the wanted model supports them, because this site does not state multi-touch support for any model. Finally, name the chosen type in the enquiry, especially for models where touch is listed as optional, so the quotation matches the intended use.
Models on this page
7 Inch Touch Monitor C0716
Resistive touch as listed.
8 Inch Touch Monitor C1208
Resistive or capacitive touch optional as listed.
11.6 Inch Touch Monitor C1116
Resistive and capacitive touch as listed.
Enquiry checklist
Before sending an enquiry, note the screen size, touch type, interface list, quantity and application, and whether the monitor will be open frame, embedded or panel mounted. Minimum order quantity and lead time are unavailable on this site and are confirmed per model in the enquiry. Quotations are confirmed per order.
Send an enquiry | Telephone: 0755-89356766, 137 6020 7772
Frequently asked questions
How do I get a quotation?
Send an enquiry with the size, touch type, interface list and quantity you need, plus the application. Quotations are confirmed per order, and specifications are confirmed per model before payment. This site does not list fixed selling figures.
What certification documents can you provide?
CCC, CE, FCC and RoHS are stated by the company. Certificates are available upon request. If a buyer needs a certificate for a specific model, ask for it in the enquiry and name the model, so the correct document can be checked.
Are the specifications on this page valid for every model?
No. Specifications are shown per model and must not be read across the whole range. Where a value is not listed for a model, the page says to confirm per model rather than filling in a generic figure.