Open Frame LCD Monitor
An open frame LCD monitor is an open frame panel built around a liquid crystal display. Our monitors are finished display units with housings, interfaces and touch layers, not display modules or components.
SCHEMATIC ILLUSTRATION - NOT TO SCALE - NOT A PRODUCT PHOTOGRAPH
LCD panels in an industrial setting
Liquid crystal displays are the standard panel type for industrial monitors, because they offer a flat, compact screen with a wide range of sizes and resolutions. Our listed models use LCD panels in sizes from 7 inch to 15.6 inch, with resolutions from 1024 by 600 to 1920 by 1200 depending on the model. Aspect ratios also differ: the 7 inch and 11.6 inch models are listed at 16:9, the 8 inch model at 4:3, and the 10.1 inch model at 16:10. A buyer should check the aspect ratio as well as the size, because it changes how content is laid out on the screen.
Brightness is quoted in candela per square metre, and it only makes sense when the value is tied to a model. A brighter screen is easier to read in a bright room, but brightness alone does not decide readability: the lighting in the room, the angle of the screen and the content on display all play a part. Each model page gives the brightness figure listed for that model, and the brightness guide page compares those figures model by model. No single brightness figure applies to the whole range: the listed figures differ between models.
Open frame LCD monitors and enclosures
Mounting form decides how a monitor fits into a finished product, and it should be settled before size or touch type is finalised. An open frame monitor is supplied as a panel for building into a cabinet or a kiosk, so the buyer takes responsibility for the surrounding enclosure and for ventilation. An embedded monitor is designed to sit inside an existing opening, while a panel mount monitor is fixed through a cut-out with its front face visible. Each form changes the measurements that matter: overall size, visible area, fixing positions and depth behind the panel. The enquiry should therefore state the mounting form and the available opening, rather than giving only a screen size.
An open frame LCD monitor is fitted into an enclosure designed for the finished product, so the buyer should plan ventilation, cable entry and access for service. A sealed enclosure without ventilation can trap heat, and a monitor that cannot be reached for service will cost more to maintain over its life. The enquiry should therefore describe the enclosure as well as the panel, so any fit or cooling concern can be raised before an order is placed.
Outside the company's products
This page does not cover LCD display modules, bare panels without housings, or replacement panels for consumer televisions, because those are not the company's listed products. No panel lifetime, viewing angle or colour specification is listed for any model. A buyer who needs those values should ask for them per model in the enquiry.
Our listed models
7 Inch Touch Monitor C0716
16:9 IPS panel as listed, 1024 by 600 resolution.
8 Inch Touch Monitor C1208
4:3 panel as listed, 1024 by 768 resolution.
10.1 Inch Touch Monitor C1016
16:10 panel as listed, 1280 by 800 and 1920 by 1200 resolution.
Enquiry checklist
Before sending an enquiry, note the screen size, touch type, interface list, quantity and application, and whether the monitor will be open frame, embedded or panel mounted. Minimum order quantity and lead time are confirmed per model in the enquiry. Quotations are confirmed per order.
Request a quotation for an industrial monitor | Telephone: 0755-89356766, 137 6020 7772
Frequently asked questions
How do I get a quotation?
Send an enquiry with the size, touch type, interface list and quantity you need, plus the application. Quotations are confirmed per order, and specifications are confirmed per model before payment. We do not list fixed selling figures.
What certification documents can you provide?
CCC, CE, FCC and RoHS are stated by the company. Certificates are available upon request. If a buyer needs a certificate for a specific model, ask for it in the enquiry and name the model, so the correct document can be checked.
Are the specifications on this page valid for every model?
No. Specifications are shown per model and must not be read across the whole range. Where a value is not listed for a model, confirm it per model in the enquiry rather than assuming a generic figure.