Industrial Monitor Mounts: Wall, Stand, Arm and Panel Options
A monitor mount decides where a screen sits, how it can be adjusted and how it can be serviced, and a poor mount choice can waste a good screen. This guide discusses monitor mounts in general terms: wall mounts, stands, arms and panel mounts, and what to check before ordering. It does not present a mount product line, because mounts are accessories whose suitability depends on the monitor model and the installation. The 15.6 inch listed model is the only model on this site with a listed mounting pattern, and that fact shapes what this guide can promise.
Wall mounts and the listed mounting pattern
A wall mount fixes a screen to a wall, freeing desk or floor space and giving a fixed viewing position. The mount must match the screen's mounting hole pattern and its weight, and the wall must be able to carry the load. The 15.6 inch C1516 lists a mounting hole pattern of 75 by 75 millimetres, with wall mounting as standard and a stand as optional, which makes it the clearest wall-mount candidate among the listed models. The other listed models do not list a mounting pattern, so their wall-mount suitability should be confirmed per model in the enquiry rather than assumed from the 15.6 inch model. A buyer who needs a wall mount should name the model and ask for its mounting pattern and weight, because a mount chosen without those figures may not fit.
Wall mounting also fixes the viewing height and angle, so those should be planned before the mount is fixed. A screen mounted too high forces viewers to look up, while a screen mounted too low forces them to look down, and both cause fatigue over a long session. The viewing distance should also be planned, because a wall-mounted screen cannot be moved closer when detail needs checking.
Stands, arms and panel mounts
A stand sits on a desk or a counter and suits a control station, a viewing station or a terminal where the screen stays in one place but may need to be moved occasionally. The 15.6 inch model lists a stand as optional, while the smaller listed models list stands among their accessories where stated on their product pages. A buyer should check the accessory list on each product page, because stands are listed per model and should not be assumed for every model. An arm mount, fixed to a desk, a wall or a machine, allows the screen to be tilted, swivelled and moved, which suits a workstation where several people share one screen or where the viewing angle changes during the day. An arm must be rated for the screen's weight and size, and that rating should be checked against the model's weight where listed.
A panel mount fixes the screen through a cut-out in a panel, so its front face becomes part of the product's own front. That form suits a control panel, a machine front or a kiosk, where the screen is part of the product rather than a separate unit. The panel mount guide discusses cut-out dimensions and service access in more detail, and the mounting dimensions should be confirmed per model before any panel is cut.
What to check before ordering a mount
Before ordering a mount, check the screen's mounting pattern, its weight, its overall dimensions, the wall or desk that will carry it, the cable route and the service access. A mount that fits the pattern but not the weight will fail, and a mount that fits the weight but blocks the cables or the service access will cause problems later. The viewing height, angle and distance should also be planned, because a mount fixes those once it is installed. A buyer who needs a mount should state the model, the wanted mount type and the installation place in the enquiry, so the suitability can be confirmed per model. Where a model does not list a mounting pattern, the enquiry is the place to ask for it, and the answer should be treated as model-specific.
Cable management is part of the mount choice. A wall mount with no cable route leaves cables hanging, while an arm mount with a cable channel keeps them tidy and protected. A panel mount with no cable access behind the panel makes service harder. The cable route should be planned with the mount, not after it, because a tidy installation is easier to service and less likely to suffer cable damage.
What to ask in the enquiry
For a mount enquiry, the details that matter are the monitor model, the wanted mount type, the installation place, the viewing height and distance, and the quantity. The enquiry should also state whether the mount must allow adjustment, and how the screen will be serviced. Until a mounting pattern is confirmed per model, this site does not present any model other than the 15.6 inch C1516 as having a listed mounting pattern, and a buyer should ask about the pattern for any other model explicitly.
Mounts for shared and multi-user screens
A shared screen, used by several people during the day, needs a mount that suits different users, not just the first user. An arm mount suits a shared workstation, because each user can tilt and swivel the screen to their own height and angle, while a fixed wall mount suits a shared viewing screen, because the screen stays in one place that everyone can see. A desk stand suits a screen that stays with one workstation but may be moved occasionally for cleaning or service. The mount choice should therefore start from the users: how many people will use the screen, whether they sit or stand, and whether they need to adjust it.
A shared screen also needs a mount that survives frequent adjustment. An arm that is adjusted many times a day needs joints rated for that use, and a stand that is moved for cleaning needs a stable base that will not tip. The cable route should also allow adjustment without straining the cables, because a cable that is pulled every time the screen moves will fail early. A buyer should ask about the adjustment rating and the cable management of a mount in the enquiry, and should test the mount with the real screen weight, because a mount rated for a lighter screen may sag or drift under a heavier one.
Enquiry checklist
Before sending an enquiry, note the screen size, touch type, interface list, quantity and application, and whether the monitor will be open frame, embedded or panel mounted. Minimum order quantity and lead time are unavailable on this site and are confirmed per model in the enquiry. Quotations are confirmed per order.
Send an enquiry | Telephone: 0755-89356766, 137 6020 7772
Frequently asked questions
How do I get a quotation?
Send an enquiry with the size, touch type, interface list and quantity you need, plus the application. Quotations are confirmed per order, and specifications are confirmed per model before payment. This site does not list fixed selling figures.
What certification documents can you provide?
CCC, CE, FCC and RoHS are stated by the company. Certificates are available upon request. If a buyer needs a certificate for a specific model, ask for it in the enquiry and name the model, so the correct document can be checked.
Are the specifications on this page valid for every model?
No. Specifications are shown per model and must not be read across the whole range. Where a value is not listed for a model, the page says to confirm per model rather than filling in a generic figure.